Tel: 08 - 24 81 90
Arne Beurlings torg 9B, Kista
info@macdata.se

Interface - USB - OWC Accelsior S SSD SATA-3 expansion card PCIe

Produktbild
OWC Accelsior S SSD SATA-3 expansion card PCIe

Add a 2.5" SATA 6G Drive to your Mac or PC

• Directly mount any standard 2.5" drive.
• Up to 550 MB/s sustained speeds.
• Enhance SATA 3Gb/s systems with SATA 6Gb/s support.
• Easy installation. No drivers required.

Give Your Mac Pro Tower or PC a 6G Performance Boost
Accelsior S is the simple solution to add a high speed SATA 6G drive to PCs or silver Mac Pro towers otherwise restricted to 3G architecture. Combined with a high-performance SSD, Accelsior S brings cutting edge 6G performance to your SATA 3G system.
Internal Storage Expansion at Lightning Speed
With more than 500 MB/s of throughput, the Accelsior S dual-lane PCIe 2.0 card delivers flexible storage expansion - with a speed boost - to your Mac or PC. Accelsior S is the perfect complement to OWC's Mercury family of high-performance SSD's, allowing up to an extra 1TB of fast storage expansion.
Just Plug and Play
Mount a 2.5" drive to the Accelsior S, install in any available PCIe x4 (or greater) slot, and you're up and running with expanded high-speed storage. Use as a native, high-speed, boot drive or scratch-disk and boost capacity and performance. With no drivers or extra software needed, upgrading your PC or legacy Mac Pro tower with Accelsior S is a breeze.

Note about throughput:
• PC Throughput:
PCIe 2.0 x4 slot or better is required. Use of a PCIe 1.0 x4 slot will reduce performance.
• Mac Pro Throughput:
2009-2010 Mac Pro. Installing Accelsior S into any open x4 or x16 PCIe 2.0 slot will deliver full throughput
2008 Mac Pro. These models have two x16 PCIe 2.0 slots, which enable Acceslsior S to deliver full throughput. Installing Accelsior S into of the two x4 PCIe 1.0 slots will result in Accelsior S being addressed as a gen one, one-lane card with performance limited to real world 190-200MB/s data rates.
2006-2007 Mac Pro. These models utilize PCIe 1.0 slot which cannot be configured (even with the Expansion Utility in OS X) to address Accelsior S as anything but as a first generation one-lane card. As a result, Accelsior S performance will be limited to 190-200MB/s data rates. If maximum data rate speedis desired, we recommend the installation of a 2.5" OWC Mercury SSD in an open Mac Pro drive bay.

Compatible with:

- Mac Pro Quad-Core
(Mid 2010-2012
Model ID: MacPro5,1

- Mac Pro 6-Core
(Mid 2010-2012)
Model ID: MacPro5,1

- Mac Pro 8-Core (Mid 2010)
Model ID: MacPro5,1

- Mac Pro 12-Core
(Mid 2010-2012)

- Mac Pro (Early 2009 Quad-Core)
Model ID: MacPro4,1

- Mac Pro (Early 2009 8-Core)
Model ID: MacPro4,1

- Mac Pro (Early 2008)
Mac Pro (Early 2008)

- Mac Pro (8-core)
Model ID: MacPro2,1

- Mac Pro
Model ID: MacPro1,1

- Xserve (Late 2006)
Model ID: Xserve1,1

- Xserve (Early 2008)
Model ID: Xserve2,1

- Xserve Quad-Core (Early
Model ID: Xserve3,1

- Xserve 8-Core (Early 2009)
Model ID: Xserve3,1

Se även: http://eshop.macsales.com/item/OWC/SSDACL6G.S/

Konfigurationer

MacPro2009 (OWCSSDACL6G.S) [OWCSSDACL6G.S] 488 (391 utan moms) SEK
2 i distanslager